A review of single-phase pressure drop characteristics microchannels with bends

Endro Junianto, Jooned Hendrarsakti

Abstract

Microfluidic use in various innovative research, many fields aimed at developing an application device related to handling fluid flows in miniature scale systems. On the other hand, on the use of micro-devices for fluid flow the existence of bends cannot be avoided. This research aims to make a comprehensive study of fluid flow characteristics through a microchannel with several possible bends. This study was conducted by comparing Reynolds number versus pressure drop in a serpentine microchannel to gain bends loss coefficient. The result showed that the fluid flow with Re < 100 did not affect the pressure drop, but on the Reynolds number above that, the pressure drop was increased along with the appears of vortices in the outer and inner walls around the channel bends which causes an increase in an additional pressure drop. The other finding shows that the reduction in diameter bend tube can increase the pressure drop.



Keywords


pressure drop; bend loss coefficient; single-phase; microchannel bends

Full Text:

PDF


References


Y. Xu, H. Fan, and B. Shao, “Experimental and numerical investigations on heat transfer and fluid flow characteristics of integrated U-shape micro heat pipe array with rectangular pin fins,” Appl. Therm. Eng., vol. 168, p. 114640, 2020.

S. Maharudrayya, S. Jayanti, and A. P. Deshpande, “Pressure losses in laminar flow through serpentine channels in fuel cell stacks,” J. Power Sources, vol. 138, no. 1–2, pp. 1–13, 2004.

T. Ouyang, J. Lu, Z. Zhao, J. Chen, and P. Xu, “New insight on the mechanism of vibration effects in vapor-feed microfluidic fuel cell,” Energy, vol. 225, p. 120207, Jun. 2021, doi: 10.1016/j.energy.2021.120207.

N. Aoki, T. Fukuda, N. Maeda, and K. Mae, “Design of confluence and bend geometry for rapid mixing in microchannels,” Chem. Eng. J., vol. 227, pp. 198–202, 2013.

E. Mousset, “Unprecedented reactive electro-mixing reactor: Towards synergy between micro- and macro-reactors?,” Electrochem. commun., vol. 118, p. 106787, Sep. 2020, doi: 10.1016/j.elecom.2020.106787.

R. Gatignol, “Asymptotic modelling of flows in microchannel by using Navier–Stokes or Burnett equations and comparison with DSMC simulations,” Vacuum, vol. 86, no. 12, pp. 2014–2028, Jul. 2012, doi: 10.1016/j.vacuum.2012.04.043.

A. Qazi Zade, A. Ahmadzadegan, and M. Renksizbulut, “A detailed comparison between Navier–Stokes and DSMC simulations of multicomponent gaseous flow in microchannels,” Int. J. Heat Mass Transf., vol. 55, no. 17–18, pp. 4673–4681, Aug. 2012, doi: 10.1016/j.ijheatmasstransfer.2012.04.026.

J. Chen, S. K. Stefanov, L. Baldas, and S. Colin, “Analysis of flow induced by temperature fields in ratchet-like microchannels by Direct Simulation Monte Carlo,” Int. J. Heat Mass Transf., vol. 99, pp. 672–680, Aug. 2016, doi: 10.1016/j.ijheatmasstransfer.2016.04.023.

A. Gavasane, A. Agrawal, and U. Bhandarkar, “Study of rarefied gas flows in backward facing micro-step using Direct Simulation Monte Carlo,” Vacuum, vol. 155, pp. 249–259, Sep. 2018, doi: 10.1016/j.vacuum.2018.06.014.

R. Xiong and J. N. Chung, “Effects of miter bend on pressure drop and flow structure in micro-fluidic channels,” Int. J. Heat Mass Transf., vol. 51, no. 11–12, pp. 2914–2924, 2008.

S. Buscher, “Two-phase pressure drop and void fraction in a cross-corrugated plate heat exchanger channel: Impact of flow direction and gas-liquid distribution,” Exp. Therm. Fluid Sci., vol. 126, p. 110380, Aug. 2021, doi: 10.1016/j.expthermflusci.2021.110380.

W. Bai, W. Chen, L. Yang, and M. K. Chyu, “Numerical investigation on heat transfer and pressure drop of pin-fin array under the influence of rib turbulators induced vortices,” Int. J. Heat Mass Transf., vol. 129, pp. 735–745, Feb. 2019, doi: 10.1016/j.ijheatmasstransfer.2018.10.022.

A. I. Bashir, M. Everts, and J. P. Meyer, “Influence of inlet contraction ratios on the heat transfer and pressure drop characteristics of single-phase flow in smooth circular tubes in the transitional flow regime,” Exp. Therm. Fluid Sci., vol. 109, p. 109892, Dec. 2019, doi: 10.1016/j.expthermflusci.2019.109892.

H. Fazelnia, S. Azarhazin, B. Sajadi, M. A. A. Behabadi, S. Zakeralhoseini, and M. V. Rafieinejad, “Two-phase R1234yf flow inside horizontal smooth circular tubes: Heat transfer, pressure drop, and flow pattern,” Int. J. Multiph. Flow, vol. 140, p. 103668, Jul. 2021, doi: 10.1016/j.ijmultiphaseflow.2021.103668.

I. Papautsky, T. Ameel, and A. B. Frazier, “A review of laminar single-phase flow in microchannels,” in ASME, Proceedings of Int. Mech. Eng Congress Expos Proc (IMECE), 2001, vol. 2, pp. 3067–3075.

M. H. Mousa, N. Miljkovic, and K. Nawaz, “Review of heat transfer enhancement techniques for single phase flows,” Renew. Sustain. Energy Rev., vol. 137, p. 110566, Mar. 2021, doi: 10.1016/j.rser.2020.110566.

S. G. Kandlikar, S. Joshi, and S. Tian, “Effect of channel roughness on heat transfer and fluid flow characteristics at low Reynolds numbers in small diameter tubes,” Atmosphere (Basel)., vol. 4, no. 7, 2001.

X. Yuan, Z. Tao, H. Li, and Y. Tian, “Experimental investigation of surface roughness effects on flow behavior and heat transfer characteristics for circular microchannels,” Chinese J. Aeronaut., vol. 29, no. 6, pp. 1575–1581, 2016.

D. Toghraie, R. Mashayekhi, M. Niknejadi, and H. Arasteh, “Hydrothermal performance analysis of various surface roughness configurations in trapezoidal microchannels at slip flow regime,” Chinese J. Chem. Eng., 2020.

R. Jafari, T. Okutucu-Özyurt, H. Ö. Ünver, and Ö. Bayer, “Experimental investigation of surface roughness effects on the flow boiling of R134a in microchannels,” Exp. Therm. Fluid Sci., vol. 79, pp. 222–230, 2016.

L. Guo, H. Xu, and L. Gong, “Influence of wall roughness models on fluid flow and heat transfer in microchannels,” Appl. Therm. Eng., vol. 84, pp. 399–408, 2015.

J. R. Valdés, M. J. Miana, J. L. Pelegay, J. L. Núñez, and T. Pütz, “Numerical investigation of the influence of roughness on the laminar incompressible fluid flow through annular microchannels,” Int. J. Heat Mass Transf., vol. 50, no. 9–10, pp. 1865–1878, 2007.

J. R. Valdés, M. J. Miana, M. Martínez, L. Gracia, and T. Pütz, “Introduction of a length correction factor for the calculation of laminar flow through microchannels with high surface roughness,” Int. J. Heat Mass Transf., vol. 51, no. 17–18, pp. 4573–4582, 2008.

A. K. Sadaghiani and A. Koşar, “Numerical investigations on the effect of fin shape and surface roughness on hydrothermal characteristics of slip flows in microchannels with pin fins,” Int. J. Therm. Sci., vol. 124, pp. 375–386, 2018.

H. Lu, M. Xu, L. Gong, X. Duan, and J. C. Chai, “Effects of surface roughness in microchannel with passive heat transfer enhancement structures,” Int. J. Heat Mass Transf., vol. 148, p. 119070, 2020.

J. Judy, D. Maynes, and B. W. Webb, “Characterization of frictional pressure drop for liquid flows through microchannels,” Int. J. Heat Mass Transf., vol. 45, no. 17, pp. 3477–3489, 2002.

H. Y. Wu and P. Cheng, “Friction factors in smooth trapezoidal silicon microchannels with different aspect ratios,” Int. J. Heat Mass Transf., vol. 46, no. 14, pp. 2519–2525, 2003.

G. L. Morini, M. Spiga, and P. Tartarini, “The rarefaction effect on the friction factor of gas flow in microchannels,” Superlattices Microstruct., vol. 35, no. 3–6, pp. 587–599, 2004.

V. Silvério and A. L. N. Moreira, “Friction losses and heat transfer in laminar microchannel single-phase liquid flow, 6th Int,” 2008.

Z.-X. Li, D. X. Du, and Z.-Y. Guo, “Characteristics of frictional resistance for gas flow in microtubes,” in Proceedings of symposium on energy engineering in the 21st Century, 2000, vol. 2, pp. 658–664.

C. Hong, T. Nakamura, Y. Asako, and I. Ueno, “Semi-local friction factor of turbulent gas flow through rectangular microchannels,” Int. J. Heat Mass Transf., vol. 98, pp. 643–649, 2016.

C. Hong, T. Shigeishi, Y. Asako, and M. Faghri, “Experimental investigations of local friction factors of laminar and turbulent gas flows in smooth micro-tubes,” Int. J. Heat Mass Transf., vol. 158, p. 120035, Sep. 2020, doi: 10.1016/j.ijheatmasstransfer.2020.120035.

C. Hong, T. Nakamura, Y. Asako, and I. Ueno, “Semi-local friction factor of turbulent gas flow through rectangular microchannels,” Int. J. Heat Mass Transf., vol. 98, pp. 643–649, Jul. 2016, doi: 10.1016/j.ijheatmasstransfer.2016.02.080.

S. Shen, J. L. Xu, J. J. Zhou, and Y. Chen, “Flow and heat transfer in microchannels with rough wall surface,” Energy Convers. Manag., vol. 47, no. 11–12, pp. 1311–1325, 2006.

G. P. Celata, G. L. Morini, V. Marconi, S. J. McPhail, and G. Zummo, “Using viscous heating to determine the friction factor in microchannels–An experimental validation,” Exp. Therm. Fluid Sci., vol. 30, no. 8, pp. 725–731, 2006.

P. Gunnasegaran, H. Mohammed, and N. H. Shuaib, “Pressure drop and friction factor for different shapes of microchannels,” in 2009 3rd International Conference on Energy and Environment (ICEE), 2009, pp. 418–426.

H. S. Park and J. Punch, “Friction factor and heat transfer in multiple microchannels with uniform flow distribution,” Int. J. Heat Mass Transf., vol. 51, no. 17–18, pp. 4535–4543, 2008.

L. S. Ding, H. Sun, X. L. Sheng, and B. D. Lee, “Measurement of friction factors for R134a & R12 through microchannel,” 2000, Accessed: Jul. 26, 2021. [Online]. Available: https://www.begellhouse.com/ebook_platform/3c7d625c6a3f5a22,12a709f52275ec7f,763395d572073005.html.

D. Pfund, D. Rector, A. Shekarriz, A. Popescu, and J. Welty, “Pressure drop measurements in a microchannel,” AIChE J., vol. 46, no. 8, pp. 1496–1507, 2000.

M. Bahrami, M. M. Yovanovich, and J. R. Culham, “Pressure Drop of Fully-Developed, Laminar Flow in Microchannels of Arbitrary Cross-Section,” J. Fluids Eng., vol. 128, no. 5, pp. 1036–1044, Sep. 2006, doi: 10.1115/1.2234786.

Y. W. Hwang and M. S. Kim, “The pressure drop in microtubes and the correlation development,” Int. J. Heat Mass Transf., vol. 49, no. 11–12, pp. 1804–1812, 2006.

W. Qu, I. Mudawar, S.-Y. Lee, and S. T. Wereley, “Experimental and computational investigation of flow development and pressure drop in a rectangular micro-channel,” 2006.

P. Hrnjak and X. Tu, “Single phase pressure drop in microchannels,” Int. J. Heat Fluid Flow, vol. 28, no. 1, pp. 2–14, 2007.

M. E. Steinke and S. G. Kandlikar, “Single-phase liquid friction factors in microchannels,” Int. J. Therm. Sci., vol. 45, no. 11, pp. 1073–1083, 2006.

T. L. Ngo, Y. Kato, K. Nikitin, and T. Ishizuka, “Heat transfer and pressure drop correlations of microchannel heat exchangers with S-shaped and zigzag fins for carbon dioxide cycles,” Exp. Therm. Fluid Sci., vol. 32, no. 2, pp. 560–570, 2007.

M. J. Fuerstman, A. Lai, M. E. Thurlow, S. S. Shevkoplyas, H. A. Stone, and G. M. Whitesides, “The pressure drop along rectangular microchannels containing bubbles,” Lab Chip, vol. 7, no. 11, pp. 1479–1489, 2007.

X. Zhang, T. Zhao, S. Wu, and F. Yao, “Experimental Study on Liquid Flow and Heat Transfer in Rough Microchannels,” Adv. Condens. Matter Phys., vol. 2019, pp. 1–9, Nov. 2019, doi: 10.1155/2019/1974952.

D. Klein, G. Hetsroni, and A. Mosyak, “Heat transfer characteristics of water and APG surfactant solution in a micro-channel heat sink,” Int. J. Multiph. Flow, vol. 31, no. 4, pp. 393–415, 2005.

P.-S. Lee, S. V Garimella, and D. Liu, “Investigation of heat transfer in rectangular microchannels,” Int. J. Heat Mass Transf., vol. 48, no. 9, pp. 1688–1704, 2005.

Z. Li, Y.-L. He, G.-H. Tang, and W.-Q. Tao, “Experimental and numerical studies of liquid flow and heat transfer in microtubes,” Int. J. Heat Mass Transf., vol. 50, no. 17–18, pp. 3447–3460, 2007.

P.-S. Lee and S. V Garimella, “Saturated flow boiling heat transfer and pressure drop in silicon microchannel arrays,” Int. J. Heat Mass Transf., vol. 51, no. 3–4, pp. 789–806, 2008.

Z. Dai, D. F. Fletcher, and B. S. Haynes, “Impact of tortuous geometry on laminar flow heat transfer in microchannels,” Int. J. Heat Mass Transf., vol. 83, pp. 382–398, 2015.

A. Taassob, R. Kamali, and A. Bordbar, “Investigation of rarefied gas flow through bended microchannels,” Vacuum, vol. 151, pp. 197–204, 2018.

A. F. Al-Neama, N. Kapur, J. Summers, and H. M. Thompson, “An experimental and numerical investigation of the use of liquid flow in serpentine microchannels for microelectronics cooling,” Appl. Therm. Eng., vol. 116, pp. 709–723, 2017.

M. A. Ansari and K.-Y. Kim, “Parametric study on mixing of two fluids in a three-dimensional serpentine microchannel,” Chem. Eng. J., vol. 146, no. 3, pp. 439–448, Feb. 2009, doi: 10.1016/j.cej.2008.10.006.

C. White, M. K. Borg, T. J. Scanlon, and J. M. Reese, “A DSMC investigation of gas flows in micro-channels with bends,” Comput. Fluids, vol. 71, pp. 261–271, 2013.

O. I. Rovenskaya, “Computational study of 3D rarefied gas flow in microchannel with 90 bend,” Eur. J. Mech., vol. 59, pp. 7–17, 2016.

L. Nguyen, J. Elsnab, and T. Ameel, “Contraction/expansion effects in 90 miter bends in rectangular xurographic microchannels,” in ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, 2011, pp. 667–677.

G. Arun, S. P. K. Babu, S. Natarajan, and N. Kulasekharan, “Study of flow behaviour in sharp and mitred pipe bends,” Mater. Today Proc., 2019.

A. Agrawal, L. Djenidi, and A. Agrawal, “Simulation of gas flow in microchannels with a single 90 bend,” Comput. Fluids, vol. 38, no. 8, pp. 1629–1637, 2009.

R. Xiong and J. N. Chung, “Flow characteristics of water in straight and serpentine micro-channels with miter bends,” Exp. Therm. Fluid Sci., vol. 31, no. 7, pp. 805–812, 2007.

D. Torgerson, R. Kolekar, B. Gale, and T. Ameel, “Minor losses in rectangular xurographic microchannels,” in ASME 2010 International Mechanical Engineering Congress and Exposition, 2010, pp. 453–462.


Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM

Refbacks

  • There are currently no refbacks.




Copyright (c) 2021 Journal of Mechatronics, Electrical Power, and Vehicular Technology

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.