Design, construction, and evaluation of transformer-based orbital shaker for coffee micropropagation
This study offers a novel solution to deal with the complicated electronic circuitry for speed controller and too complex mechanical design of rotating mechanism of an orbital shaker. The developed prototype used a transformer that varies the supply voltage to control the speed of rotation of the orbital shaker. The prototype has five speed levels which depend on the input voltage. These speeds are 180 rpm at 12 V, 258 rpm at 15 V, 360 rpm at 18 V, 427 rpm at 21 V, and 470 rpm at 24 V. The prototype was tested to run continuously for 48 hours for each speed level, with speed being measured every hour using a tachometer. Statistical computation shows that the speed remains constant for the entire 48 hour period. Evaluation of results shows that the speed controller and the novel mechanical design for the orbital shaking motion achieved their functions. For this reason, it can be concluded that the prototype is durable and safe for use in orbital shaking applications.
A. Mohini, “Microcontroller based orbital motion shaker,” in ICIIBMS 2015, Track 2: Artificial Intelligence, Robotics and Human-Computer Interaction, Okinawa, Japan Microcontroller, pp. 115–120, 2015.
C. M. Warboys, M. Ghim, and P. D. Weinberg, “Understanding mechanobiology in cultured endothelium: A review of the orbital shaker method,” Atherosclerosis, vol. 285, no. March, pp. 170–177, 2019.
J. Nedbal, L. Gao, and K. Suhling, “Bottom-illuminated orbital shaker for microalgae cultivation,” HardwareX, vol. 8, p. e00143, 2020.
P. Alpresa et al., “Orbitally shaken shallow fluid layers. II. An improved wall shear stress model stress model,” Phys. Fluids, vol. 032108, 2018.
N. Muller, P. Girard, D. L. Hacker, M. Jordan, and F. M. Wurm, “Orbital shaker technology for the cultivation of mammalian cells in suspension,” Biotechnol. Bioeng., no. February, 2005.
W. Klöckner and J. Büchs, “Advances in shaking technologies,” Trends Biotechnol., vol. 30, no. 6, pp. 307–314, 2012.
DIYbio orbital shaker V 1.0. Available: https://www.thingiverse.com/thing:2633507. Accessed May 11, 2022.
Customized shaker platforms for DIYbio orbital shaker license. Available: https://www.printables.com/model/33650-customized-shaker-platforms-for-diybio-orbital-sha. Accessed May 11, 2022.
Orbital shaker literature review. Available: https://www.appropedia.org/Orbital_shaker_literature_review. Accessed May 11, 2022.
A. A. Alawaadh, Y. H. Dewir, M. S. Alwihibi, A. A. Aldubai, S. El-Hendawy, and Y. Naidoo, “Micropropagation of lacy tree Philodendron (Philodendron bipinnatifidum Schott ex Endl.),” HortScience, vol. 55, no. 3, pp. 294–299, 2020.
M. Lara-Ascencio, M. Andrade-Rodríguez, D. Guillén-Sánchez, H. Sotelo-Nava, and O. G. Villegas-Torres, “Establishment of in vitro aseptic culture of Philodendron xanadu Croat,” Rev. Cienc. Agron., vol. 52, no. 2, pp. 1–9, 2021.
M. K. Seliem, M. E. El-Mahrouk, A. N. El-Banna, Y. M. Hafez, and Y. H. Dewir, “Micropropagation of Philodendron selloum: Influence of copper sulfate on endophytic bacterial contamination, antioxidant enzyme activity, electrolyte leakage, and plant survival,” South African J. Bot., vol. 139, pp. 230–240, 2021.
E. R. Arboleda, A. C. Fajardo, and R. P. Medina, “Green coffee beans feature extractor using image processing,” Telkomnika (Telecommunication Comput. Electron. Control.), vol. 18, no. 4, p. 2027, 2020.
E. R. Arboleda, A. C. Fajardo, and R. P. Medina, “Classification of coffee bean species using image processing, artificial Neural Network and K Nearest Neighbors,” 2018 IEEE International Conference on Innovative Research and Development (ICIRD), 2018.
C. L. Encina and J. Regalado, “Aspects of in vitro plant tissue culture and breeding of Asparagus: a review,” Horticulturae, 8(5), 439, pp. 1–15, 2022.
H. Chandran, M. Meena, T. Barupal, and K. Sharma, “Plant tissue culture as a perpetual source for production of industrially important bioactive compounds,” Biotechnol. Reports, vol. 26, p. e00450, 2020.
S. C. Chun, J. Gopal, S. Iyyakannu, and M. Muthu, “An analytical retrospection of mass spectrometric tools established for plant tissue culture: Current endeavours and future perspectives,” TrAC - Trends Anal. Chem., vol. 126, p. 115843, 2020.
Y. V. P. Paulite, N. J. C. Carandang, and E. R. Arboleda, “Smart Wheelchair with Dual Control Using Touchpad and Android Mobile Device,” Indones. J. Electr. Eng. Informatics, vol. 6, no. 1, pp. 86–96, 2018.
E. R. Arboleda, M. C. T. Alegre, and K. F. Idica, “Development of a low-cost electronic wheelchair with obstacle avoidance feature,” J. Mechatronics, Electr. Power, Veh. Technol., vol. 6, no. 2, p. 89, 2015.
M. G. Dizon, C. T. Sevillano, and M. A. T. Cabaluna, “Design and development of rc railed robot for coffee nursery logistics,” J. Mechatronics, Electr. Power, Veh. Technol., vol. 5, no. 2, pp. 107–114, 2014.
M. Z. Romdlony and F. Irsyadi, “Hardware-in-the-loop simulation of DC motor as an instructional media for control system design and testing,” J. Mechatronics, Electr. Power, Veh. Technol., vol. 12, no. 2, pp. 81–86, 2021.
M. Rif’an, F. Yusivar, and B. Kusumoputro, “Sensorless-BLDC motor speed control with ensemble Kalman filter and neural network,” J. Mechatronics, Electr. Power, Veh. Technol., vol. 10, no. 1, pp. 1–6, 2019.
C. R. Lee, S. K. Kim, and C. K. Ahn, “Auto-tuning proportional-type synchronization algorithm for DC motor speed control applications,” IEEE Trans. Circuits Syst. II Express Briefs, vol. 67, no. 3, pp. 521–525, 2020.
S. M. Ali, V. V. K. Reddy, and M. S. Kalavathi, “Analysis of coupled and decoupled PWM techniques for induction motor drive,” Indones. J. Electr. Eng. Informatics, vol. 7, no. 1, pp. 94–103, 2019.
N. Farah et al., “Analysis and investigation of different advanced control strategies for high-performance induction motor drives,” Telkomnika (Telecommunication Comput. Electron. Control.), vol. 18, no. 6, pp. 3303–3314, 2020.
Metrics powered by PLOS ALM
- There are currently no refbacks.
Copyright (c) 2022 Journal of Mechatronics, Electrical Power, and Vehicular Technology
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
1. Design and implementation of a low-cost orbital shaker for laboratories
Ernesto Díaz-Ronceros, Ángel David Hernández-Amasifuen, William Joel Marín-Rodriguez, Daniel Andrade Girón, José Luis Ausejo-Sánchez, Algemiro Julio Muñoz-Vilela, Abrahán Cesar Neri-Ayala
Salud Ciencia y Tecnología year: 2023