Designing optimal speed control with observer using integrated battery-electric vehicle (IBEV) model for energy efficiency

Rina Ristiana, Arief Syaichu Rohman, Estiko Rijanto, Agus Purwadi, Egi Hidayat, Carmadi Machbub

Abstract

This paper develops an optimal speed control using a linear quadratic integral (LQI) control standard with/without an observer in the system based on an integrated battery-electric vehicle (IBEV) model. The IBEV model includes the dynamics of the electric motor, longitudinal vehicle, inverter, and battery. The IBEV model has one state variable of indirectly measured and unobservable, but the system is detectable. The objectives of this study were: (a) to create a speed control that gets the exact solution for a system with one indirect measurement and unobservable state variable; and (b) to create a speed control that has the potential to make a more efficient energy system. A full state feedback LQI controller without an observer is used as a benchmark. Two output feedback LQI controllers are designed; including one controller uses an order-4 observer and the other uses an order-5 observer. The order-4 observer does not include the battery state of charge as an observer state whereas the order-5 observer is designed by making all the state variable as the observer state and using the battery state of charge as an additional system output. An electric passenger minibus for public transport with 1500 kg weight was used as the vehicle model. Simulations were performed when the vehicle moves in a flat surface with the increased speed from stationary to 60 km/h and moves according to standard NEDC driving profile. The simulation results showed that both the output feedback LQI controllers provided similar speed performance as compared to the full state feedback LQI controller. However, the output feedback LQI controller with the order-5 observer consumed less energy than with the order-4 observer, which is about 10% for NEDC driving profile and 12% for a flat surface. It can be concluded that the LQI controller with order-5 observer gives better energy efficiency than the LQI controller with order-4 observer




Keywords


Integrated battery-electric vehicle (IBEV) model; speed control; electric vehicle; linear quadratic integral; observer system; energy efficient

Full Text:

PDF


References


A. G. Boulanger, A. C. Chu, S. Maxx, and D. L. Waltz, “Vehicle Electrification: Status and Issues,” Proceeding of the IEEE, vol. 99, no. 6, pp. 1116–1138, Jun. 2011. crossref

Q. Wang and M. Deluchi, “Impacts of electric vehicles on primary energy consumption and petroleum displacement,” Energy, vol. 17, no. 4, pp. 351–366, Apr. 1992. crossref

R. Ristiana, A. S. Rohman, A. Purwadi, and C. Machbub, “Energy efficient torque control using integrated batteryelectric vehicle model,” in Proceeding of 2017 7th IEEE International Conference on System Engineering and Technology (ICSET), 2017, pp. 223–228. crossref

R. Ristiana, A. S. Rohman, A. Purwadi, and C. Machbub, “Integrated battery-electric vehicle model and its optimal speed control application,” in Proceeding of 2017 3rd International Conference on Control, Automation and Robotics (ICCAR), 2017, pp. 588–592. crossref

R. Ristiana, H. Hindersah, A. S. Rohman, C. Machbub, A. Purwadi, and E. Rijanto, “Torque control using integrated battery-electric vehicle model with flexible shaft,” in Proceeding of 2017 4th International Conference on Electric Vehicular Technology (ICEVT), 2017, pp. 24–29. crossref

J. O'Reilly, Observers of Linear System, London: Academic Press, 1983. [7] E. Rakhshani and J. Sadeh, “Reduced-order observer control for two-area LFC system after deregulation,” Control and Intelligent Systems, vol. 38, no. 4, 2010. crossref

R. W. Erickson and D. Maksimović, Fundamentals of Power Electronics. Boston, MA: Springer US, 2001. crossref

C.-L. Xia, Permanent Magnet Brushless DC Motor Drives and Controls. Singapore: John Wiley & Sons Singapore Pte. Ltd., 2012. crossref

T. D. Gillespie, Fundamentals of Vehicle Dynamics. Warrendale, PA: SAE International, 1992. crossref

G. L. Plett, "Modelling, Simulation and Identification of Battery Dynamics," Wiley, 2014. online

M. Oswal, J. Paul, and R. Zhao, “A Comparative Study of Lithium Ion Batteries,” University of Southern California, 2010. online

R. D. Martino, “Modelling and Simulation of The Dynamic Behavior of The Automobile,” Thesis of Degree, Faculty of Engineering, Universita Degli Studi at Salerno, 2012. online

U. Kiencke and L. Nielsen, Automotive Control Systems. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. crossref

A. R. Al Tahtawi and A. S. Rohman, “Simple supercapacitor charging scheme of an electric vehicle on small-scale hardware simulator: a prototype development for education purpose,” Journal of Mechatronics, Electrical Power, and Vehicular Technology, vol. 7, no. 2, p. 77, Dec. 2016. crossref

E. C. J. R. Centre, Regulated Emissions of a Euro 5 Passenger Car Measured Over Different Driving Cycles, Institute for Environment and Sustainability, 2010. online


Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM

Refbacks

  • There are currently no refbacks.




Copyright (c) 2018 Journal of Mechatronics, Electrical Power, and Vehicular Technology

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

Cited-By